9.5" Rigid Steel Edging - Weathering Steel

• Straight lines and geometric designs
• Raised, straight-sided feature gardens
• Kitchen garden beds
• Straight run terraces/retainers
• Hard surface mounting i.e. rooftops/decking
• Raised border edging
• Medium height retainers

• 9.5 inch high, 85 inch long sections (7 feet).
• Joining plates and spiked nails included.
• 2 mm thick, 8mm top edge.
• Folded lip, no sharp edges.
• Weathering Steel Edging arrives prior to rusting occurring and appear in a black/gray color at first. 
• Rusting time after install will depend on weather conditions in your area.
• Corners are 10 inches each side of the 90 degree bend.

• Included with each 7' sections are 5 long twisted nails and the connectors.  Tek screws and driver bit are also included if you are purchasing the anchor posts.
• Not included is the anchor posts, universal bracing, preformed corners and joining sleeves.
• See details regarding bracing and joining sleeves below

Download PDF instructions

• Bracing Kits sold separately as singles.
• Required in most installations
• Recommendation is 2 per section min.
• Choose from small anchor post style or universal bracing turnbuckle style.
• Typically the small anchor posts are sufficient for the 9.5" panels.

• Joining sleeves are only needed if you are cutting the edging (therefore cutting off the built in connections) and then need to rejoin the edging.