15.75" Height Rigid Weathering Steel Edging

15.75" Height Rigid Weathering Steel Edging Panels

The versatile mid-height choice for precision landscape work. Straightcurve's 15.75" rigid CorTen steel edging delivers perfectly straight lines in a height that's ideal for accessible raised beds, tiered garden designs, and retaining walls where a full 22" would be too tall. And like all Rigid panels, they can be cut and rejoined with a sleeve for complete dimensional flexibility.

Rigid edging comes in three heights to suit any project:

• 9.5" Height — Low-profile edging for borders, shallow beds, and patio installations
• 15.75" Height — You are here. Mid-height option for accessible beds and tiered designs
• 22" Height — The most popular height for deep raised garden beds and statement planters

💡 Pro Tip: Mix Heights on Sloped Sites — All three Rigid heights (9.5", 15.75", and 22") can be connected together and leveled at the top. As the ground rises, step down to a shorter panel — so you're never burying more steel than necessary. A smart technique for terraced gardens, sloped retaining walls, and hillside installations.

🛠️ Use our free Planter Box Configurator to design your layout and get an exact parts list.

Note: The configurator is designed for fully closed planter boxes (square, rectangular, or L-shaped). Rigid edging is also ideal for open-ended applications — single-sided retaining walls, 2-sided corners, 3-sided U-shapes, and straight barrier runs. For those layouts, use the configurator as a starting point and adjust quantities as needed, or email us and we'll help you work out exactly what you need.

• Can be cut and rejoined with a sleeve — ideal when you need a non-standard length
• 2mm thick CorTen (weathering steel) — built to outlast the job site
• 8mm top edge — no sharp edges, clean professional finish
• Panels sold in pairs — mix and match sizes for any configuration
• Arrives in pre-rust state — natural patina develops after installation
• Preformed corners available — 4" each side of the 90° bend

• Mid-height raised garden beds and kitchen gardens
• Accessible and tiered garden designs
• Geometric and formal landscape designs
• Straight-run retaining walls and terraces
• Single-sided, 2-sided, and 3-sided open configurations
• Rooftop and hard surface (decking) installations

• Large Panels — 2 x 71"
• Medium Panels — 2 x 31.5"
• Filler Packs — 2 x 15.75" and 2 x 8"
• All panels: 2mm thick, 8mm top edge
• Preformed corners: 4" each side of the 90° bend

• Long twisted nails that go in the bottom flange
• Connectors to join one section to the next
• Not included: bracing, anchor posts, preformed corners, and joining sleeves (available as add-ons above)

Bracing is required in most installations. Choose between Universal Bracing or Anchor Posts (or a combination). Universal Bracing is recommended for the easiest installation.

• Minimum 2 per section recommended
• Anchor posts are installed by tek-screwing to the ribs (brackets) on the back of the edging — self-tapping screws, no pre-drilling needed

Joining sleeves are only needed if you are cutting the edging (which removes the built-in connectors) and need to rejoin the panels. Add the sleeve variant above if your project requires non-standard panel lengths.

Download 15.75" Rigid Brochure (PDF)

Use the Planter Box Configurator for closed box layouts, or email us at info@straightcurve.com for open-run and retaining wall configurations. We'll make sure you have exactly what you need.