15.75" Height Rigid Steel Edging - Weathering Steel

• Straight lines and geometric designs
• Raised, straight-sided feature gardens
• Kitchen garden beds
• Straight run terraces/retainers
• Hard surface mounting i.e. rooftops/decking
• Raised border edging
• Medium height retainers

• Large Panels - 2 Per Box 
  • 15.75 inch high, (2) 71 inch long sections (apprx 12 feet per box).
• Medium Panels - 2 Per Box 
  •  15.75 inch high, (2) 31.5 inch long sections (approx5.25 feet per box)
• Filler Packs
  • (2) - 15.75" Sections
  • (2) - 8" Sections
• 2 mm thick, 8mm top edge.
• Preformed corners are 4 inches each side of the 90 degree bend.

• Long twisted nails that go in the bottom flange
• Connectors to join one section to the next

• Bracing, anchor posts, preformed corners and joining sleeves are all sold separately
• Choose between the Universal Bracing or Anchor Posts (or a combo).  Universal Bracing recommended for the easiest installation.
• Recommended quantity
  • 2 per section for the 71" Panels
  • 1 per section for the 31.5" Panels

-Joining sleeves are ONLY needed if you are cutting the sections and then need to rejoin them as you have cut off the built in connectors.

Download Brochure

• Bracing Kits sold separately as singles.
• Required in most installations
• Recommendation is 2 per section min.
• Choose from large anchor post style or universal bracing turnbuckle style.

If you choose to go with the anchor posts are installed by tek screwing to the side of the ribs (brackets) on the back of the edging.  The screws are self tapping, and will go into the post without the need for pre-drilled holes.

• Joining sleeves are only needed if you are cutting the edging (therefore cutting off the built in connections) and then need to rejoin the edging.